#line 1 # $Id: /local/ExtUtils-MakeMaker/lib/ExtUtils/MakeMaker.pm 54639 2008-02-29T00:06:55.056100Z schwern $ package ExtUtils::MakeMaker; use strict; BEGIN {require 5.006;} require Exporter; use ExtUtils::MakeMaker::Config; use Carp (); use File::Path; our $Verbose = 0; # exported our @Parent; # needs to be localized our @Get_from_Config; # referenced by MM_Unix my @MM_Sections; my @Overridable; my @Prepend_parent; my %Recognized_Att_Keys; our $VERSION = '6.44'; our ($Revision) = q$Revision: 54639 $ =~ /Revision:\s+(\S+)/; our $Filename = __FILE__; # referenced outside MakeMaker our @ISA = qw(Exporter); our @EXPORT = qw(&WriteMakefile &writeMakefile $Verbose &prompt); our @EXPORT_OK = qw($VERSION &neatvalue &mkbootstrap &mksymlists &WriteEmptyMakefile); # These will go away once the last of the Win32 & VMS specific code is # purged. my $Is_VMS = $^O eq 'VMS'; my $Is_Win32 = $^O eq 'MSWin32'; full_setup(); require ExtUtils::MM; # Things like CPAN assume loading ExtUtils::MakeMaker # will give them MM. require ExtUtils::MY; # XXX pre-5.8 versions of ExtUtils::Embed expect # loading ExtUtils::MakeMaker will give them MY. # This will go when Embed is it's own CPAN module. sub WriteMakefile { Carp::croak "WriteMakefile: Need even number of args" if @_ % 2; require ExtUtils::MY; my %att = @_; _verify_att(\%att); my $mm = MM->new(\%att); $mm->flush; return $mm; } # Basic signatures of the attributes WriteMakefile takes. Each is the # reference type. Empty value indicate it takes a non-reference # scalar. my %Att_Sigs; my %Special_Sigs = ( C => 'ARRAY', CONFIG => 'ARRAY', CONFIGURE => 'CODE', DIR => 'ARRAY', DL_FUNCS => 'HASH', DL_VARS => 'ARRAY', EXCLUDE_EXT => 'ARRAY', EXE_FILES => 'ARRAY', FUNCLIST => 'ARRAY', H => 'ARRAY', IMPORTS => 'HASH', INCLUDE_EXT => 'ARRAY', LIBS => ['ARRAY',''], MAN1PODS => 'HASH', MAN3PODS => 'HASH', PL_FILES => 'HASH', PM => 'HASH', PMLIBDIRS => 'ARRAY', PMLIBPARENTDIRS => 'ARRAY', PREREQ_PM => 'HASH', SKIP => 'ARRAY', TYPEMAPS => 'ARRAY', XS => 'HASH', VERSION => ['version',''], _KEEP_AFTER_FLUSH => '', clean => 'HASH', depend => 'HASH', dist => 'HASH', dynamic_lib=> 'HASH', linkext => 'HASH', macro => 'HASH', postamble => 'HASH', realclean => 'HASH', test => 'HASH', tool_autosplit => 'HASH', ); @Att_Sigs{keys %Recognized_Att_Keys} = ('') x keys %Recognized_Att_Keys; @Att_Sigs{keys %Special_Sigs} = values %Special_Sigs; sub _verify_att { my($att) = @_; while( my($key, $val) = each %$att ) { my $sig = $Att_Sigs{$key}; unless( defined $sig ) { warn "WARNING: $key is not a known parameter.\n"; next; } my @sigs = ref $sig ? @$sig : $sig; my $given = ref $val; unless( grep { $given eq $_ || ($_ && eval{$val->isa($_)}) } @sigs ) { my $takes = join " or ", map { _format_att($_) } @sigs; my $has = _format_att($given); warn "WARNING: $key takes a $takes not a $has.\n". " Please inform the author.\n"; } } } sub _format_att { my $given = shift; return $given eq '' ? "string/number" : uc $given eq $given ? "$given reference" : "$given object" ; } sub prompt ($;$) { ## no critic my($mess, $def) = @_; Carp::confess("prompt function called without an argument") unless defined $mess; my $isa_tty = -t STDIN && (-t STDOUT || !(-f STDOUT || -c STDOUT)) ; my $dispdef = defined $def ? "[$def] " : " "; $def = defined $def ? $def : ""; local $|=1; local $\; print "$mess $dispdef"; my $ans; if ($ENV{PERL_MM_USE_DEFAULT} || (!$isa_tty && eof STDIN)) { print "$def\n"; } else { $ans = ; if( defined $ans ) { chomp $ans; } else { # user hit ctrl-D print "\n"; } } return (!defined $ans || $ans eq '') ? $def : $ans; } sub eval_in_subdirs { my($self) = @_; use Cwd qw(cwd abs_path); my $pwd = cwd() || die "Can't figure out your cwd!"; local @INC = map eval {abs_path($_) if -e} || $_, @INC; push @INC, '.'; # '.' has to always be at the end of @INC foreach my $dir (@{$self->{DIR}}){ my($abs) = $self->catdir($pwd,$dir); eval { $self->eval_in_x($abs); }; last if $@; } chdir $pwd; die $@ if $@; } sub eval_in_x { my($self,$dir) = @_; chdir $dir or Carp::carp("Couldn't change to directory $dir: $!"); { package main; do './Makefile.PL'; }; if ($@) { # if ($@ =~ /prerequisites/) { # die "MakeMaker WARNING: $@"; # } else { # warn "WARNING from evaluation of $dir/Makefile.PL: $@"; # } die "ERROR from evaluation of $dir/Makefile.PL: $@"; } } # package name for the classes into which the first object will be blessed my $PACKNAME = 'PACK000'; sub full_setup { $Verbose ||= 0; my @attrib_help = qw/ AUTHOR ABSTRACT ABSTRACT_FROM BINARY_LOCATION C CAPI CCFLAGS CONFIG CONFIGURE DEFINE DIR DISTNAME DL_FUNCS DL_VARS EXCLUDE_EXT EXE_FILES EXTRA_META FIRST_MAKEFILE FULLPERL FULLPERLRUN FULLPERLRUNINST FUNCLIST H IMPORTS INST_ARCHLIB INST_SCRIPT INST_BIN INST_LIB INST_MAN1DIR INST_MAN3DIR INSTALLDIRS DESTDIR PREFIX INSTALL_BASE PERLPREFIX SITEPREFIX VENDORPREFIX INSTALLPRIVLIB INSTALLSITELIB INSTALLVENDORLIB INSTALLARCHLIB INSTALLSITEARCH INSTALLVENDORARCH INSTALLBIN INSTALLSITEBIN INSTALLVENDORBIN INSTALLMAN1DIR INSTALLMAN3DIR INSTALLSITEMAN1DIR INSTALLSITEMAN3DIR INSTALLVENDORMAN1DIR INSTALLVENDORMAN3DIR INSTALLSCRIPT INSTALLSITESCRIPT INSTALLVENDORSCRIPT PERL_LIB PERL_ARCHLIB SITELIBEXP SITEARCHEXP INC INCLUDE_EXT LDFROM LIB LIBPERL_A LIBS LICENSE LINKTYPE MAKE MAKEAPERL MAKEFILE MAKEFILE_OLD MAN1PODS MAN3PODS MAP_TARGET MYEXTLIB NAME NEEDS_LINKING NOECHO NO_META NORECURS NO_VC OBJECT OPTIMIZE PERL_MALLOC_OK PERL PERLMAINCC PERLRUN PERLRUNINST PERL_CORE PERL_SRC PERM_RW PERM_RWX PL_FILES PM PM_FILTER PMLIBDIRS PMLIBPARENTDIRS POLLUTE PPM_INSTALL_EXEC PPM_INSTALL_SCRIPT PREREQ_FATAL PREREQ_PM PREREQ_PRINT PRINT_PREREQ SIGN SKIP TYPEMAPS VERSION VERSION_FROM XS XSOPT XSPROTOARG XS_VERSION clean depend dist dynamic_lib linkext macro realclean tool_autosplit MACPERL_SRC MACPERL_LIB MACLIBS_68K MACLIBS_PPC MACLIBS_SC MACLIBS_MRC MACLIBS_ALL_68K MACLIBS_ALL_PPC MACLIBS_SHARED /; # IMPORTS is used under OS/2 and Win32 # @Overridable is close to @MM_Sections but not identical. The # order is important. Many subroutines declare macros. These # depend on each other. Let's try to collect the macros up front, # then pasthru, then the rules. # MM_Sections are the sections we have to call explicitly # in Overridable we have subroutines that are used indirectly @MM_Sections = qw( post_initialize const_config constants platform_constants tool_autosplit tool_xsubpp tools_other makemakerdflt dist macro depend cflags const_loadlibs const_cccmd post_constants pasthru special_targets c_o xs_c xs_o top_targets blibdirs linkext dlsyms dynamic dynamic_bs dynamic_lib static static_lib manifypods processPL installbin subdirs clean_subdirs clean realclean_subdirs realclean metafile signature dist_basics dist_core distdir dist_test dist_ci distmeta distsignature install force perldepend makefile staticmake test ppd ); # loses section ordering @Overridable = @MM_Sections; push @Overridable, qw[ libscan makeaperl needs_linking perm_rw perm_rwx subdir_x test_via_harness test_via_script init_VERSION init_dist init_INST init_INSTALL init_DEST init_dirscan init_PM init_MANPODS init_xs init_PERL init_DIRFILESEP init_linker ]; push @MM_Sections, qw[ pm_to_blib selfdocument ]; # Postamble needs to be the last that was always the case push @MM_Sections, "postamble"; push @Overridable, "postamble"; # All sections are valid keys. @Recognized_Att_Keys{@MM_Sections} = (1) x @MM_Sections; # we will use all these variables in the Makefile @Get_from_Config = qw( ar cc cccdlflags ccdlflags dlext dlsrc exe_ext full_ar ld lddlflags ldflags libc lib_ext obj_ext osname osvers ranlib sitelibexp sitearchexp so ); # 5.5.3 doesn't have any concept of vendor libs push @Get_from_Config, qw( vendorarchexp vendorlibexp ) if $] >= 5.006; foreach my $item (@attrib_help){ $Recognized_Att_Keys{$item} = 1; } foreach my $item (@Get_from_Config) { $Recognized_Att_Keys{uc $item} = $Config{$item}; print "Attribute '\U$item\E' => '$Config{$item}'\n" if ($Verbose >= 2); } # # When we eval a Makefile.PL in a subdirectory, that one will ask # us (the parent) for the values and will prepend "..", so that # all files to be installed end up below OUR ./blib # @Prepend_parent = qw( INST_BIN INST_LIB INST_ARCHLIB INST_SCRIPT MAP_TARGET INST_MAN1DIR INST_MAN3DIR PERL_SRC PERL FULLPERL ); } sub writeMakefile { die <{ARGS}{$k} = $self->{$k}; } if ("@ARGV" =~ /\bPREREQ_PRINT\b/) { require Data::Dumper; print Data::Dumper->Dump([$self->{PREREQ_PM}], [qw(PREREQ_PM)]); exit 0; } # PRINT_PREREQ is RedHatism. if ("@ARGV" =~ /\bPRINT_PREREQ\b/) { print join(" ", map { "perl($_)>=$self->{PREREQ_PM}->{$_} " } sort keys %{$self->{PREREQ_PM}}), "\n"; exit 0; } print STDOUT "MakeMaker (v$VERSION)\n" if $Verbose; if (-f "MANIFEST" && ! -f "Makefile"){ check_manifest(); } $self = {} unless (defined $self); check_hints($self); my %configure_att; # record &{$self->{CONFIGURE}} attributes my(%initial_att) = %$self; # record initial attributes my(%unsatisfied) = (); foreach my $prereq (sort keys %{$self->{PREREQ_PM}}) { # 5.8.0 has a bug with require Foo::Bar alone in an eval, so an # extra statement is a workaround. my $file = "$prereq.pm"; $file =~ s{::}{/}g; eval { require $file }; my $pr_version = $prereq->VERSION || 0; # convert X.Y_Z alpha version #s to X.YZ for easier comparisons $pr_version =~ s/(\d+)\.(\d+)_(\d+)/$1.$2$3/; if ($@) { warn sprintf "Warning: prerequisite %s %s not found.\n", $prereq, $self->{PREREQ_PM}{$prereq} unless $self->{PREREQ_FATAL}; $unsatisfied{$prereq} = 'not installed'; } elsif ($pr_version < $self->{PREREQ_PM}->{$prereq} ){ warn sprintf "Warning: prerequisite %s %s not found. We have %s.\n", $prereq, $self->{PREREQ_PM}{$prereq}, ($pr_version || 'unknown version') unless $self->{PREREQ_FATAL}; $unsatisfied{$prereq} = $self->{PREREQ_PM}->{$prereq} ? $self->{PREREQ_PM}->{$prereq} : 'unknown version' ; } } if (%unsatisfied && $self->{PREREQ_FATAL}){ my $failedprereqs = join "\n", map {" $_ $unsatisfied{$_}"} sort { $a cmp $b } keys %unsatisfied; die <<"END"; MakeMaker FATAL: prerequisites not found. $failedprereqs Please install these modules first and rerun 'perl Makefile.PL'. END } if (defined $self->{CONFIGURE}) { if (ref $self->{CONFIGURE} eq 'CODE') { %configure_att = %{&{$self->{CONFIGURE}}}; $self = { %$self, %configure_att }; } else { Carp::croak "Attribute 'CONFIGURE' to WriteMakefile() not a code reference\n"; } } # This is for old Makefiles written pre 5.00, will go away if ( Carp::longmess("") =~ /runsubdirpl/s ){ Carp::carp("WARNING: Please rerun 'perl Makefile.PL' to regenerate your Makefiles\n"); } my $newclass = ++$PACKNAME; local @Parent = @Parent; # Protect against non-local exits { print "Blessing Object into class [$newclass]\n" if $Verbose>=2; mv_all_methods("MY",$newclass); bless $self, $newclass; push @Parent, $self; require ExtUtils::MY; no strict 'refs'; ## no critic; @{"$newclass\:\:ISA"} = 'MM'; } if (defined $Parent[-2]){ $self->{PARENT} = $Parent[-2]; for my $key (@Prepend_parent) { next unless defined $self->{PARENT}{$key}; # Don't stomp on WriteMakefile() args. next if defined $self->{ARGS}{$key} and $self->{ARGS}{$key} eq $self->{$key}; $self->{$key} = $self->{PARENT}{$key}; unless ($Is_VMS && $key =~ /PERL$/) { $self->{$key} = $self->catdir("..",$self->{$key}) unless $self->file_name_is_absolute($self->{$key}); } else { # PERL or FULLPERL will be a command verb or even a # command with an argument instead of a full file # specification under VMS. So, don't turn the command # into a filespec, but do add a level to the path of # the argument if not already absolute. my @cmd = split /\s+/, $self->{$key}; $cmd[1] = $self->catfile('[-]',$cmd[1]) unless (@cmd < 2) || $self->file_name_is_absolute($cmd[1]); $self->{$key} = join(' ', @cmd); } } if ($self->{PARENT}) { $self->{PARENT}->{CHILDREN}->{$newclass} = $self; foreach my $opt (qw(POLLUTE PERL_CORE LINKTYPE)) { if (exists $self->{PARENT}->{$opt} and not exists $self->{$opt}) { # inherit, but only if already unspecified $self->{$opt} = $self->{PARENT}->{$opt}; } } } my @fm = grep /^FIRST_MAKEFILE=/, @ARGV; parse_args($self,@fm) if @fm; } else { parse_args($self,split(' ', $ENV{PERL_MM_OPT} || ''),@ARGV); } $self->{NAME} ||= $self->guess_name; ($self->{NAME_SYM} = $self->{NAME}) =~ s/\W+/_/g; $self->init_MAKE; $self->init_main; $self->init_VERSION; $self->init_dist; $self->init_INST; $self->init_INSTALL; $self->init_DEST; $self->init_dirscan; $self->init_PM; $self->init_MANPODS; $self->init_xs; $self->init_PERL; $self->init_DIRFILESEP; $self->init_linker; $self->init_ABSTRACT; if (! $self->{PERL_SRC} ) { require VMS::Filespec if $Is_VMS; my($pthinks) = $self->canonpath($INC{'Config.pm'}); my($cthinks) = $self->catfile($Config{'archlibexp'},'Config.pm'); $pthinks = VMS::Filespec::vmsify($pthinks) if $Is_VMS; if ($pthinks ne $cthinks && !($Is_Win32 and lc($pthinks) eq lc($cthinks))) { print "Have $pthinks expected $cthinks\n"; if ($Is_Win32) { $pthinks =~ s![/\\]Config\.pm$!!i; $pthinks =~ s!.*[/\\]!!; } else { $pthinks =~ s!/Config\.pm$!!; $pthinks =~ s!.*/!!; } print STDOUT <{UNINSTALLED_PERL}; Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [$pthinks] Config says: [$Config{archname}] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. END } } $self->init_others(); $self->init_platform(); $self->init_PERM(); my($argv) = neatvalue(\@ARGV); $argv =~ s/^\[/(/; $argv =~ s/\]$/)/; push @{$self->{RESULT}}, <{NAME} extension to perl. # # It was generated automatically by MakeMaker version # $VERSION (Revision: $Revision) from the contents of # Makefile.PL. Don't edit this file, edit Makefile.PL instead. # # ANY CHANGES MADE HERE WILL BE LOST! # # MakeMaker ARGV: $argv # # MakeMaker Parameters: END foreach my $key (sort keys %initial_att){ next if $key eq 'ARGS'; my($v) = neatvalue($initial_att{$key}); $v =~ s/(CODE|HASH|ARRAY|SCALAR)\([\dxa-f]+\)/$1\(...\)/; $v =~ tr/\n/ /s; push @{$self->{RESULT}}, "# $key => $v"; } undef %initial_att; # free memory if (defined $self->{CONFIGURE}) { push @{$self->{RESULT}}, < 0) { foreach my $key (sort keys %configure_att){ next if $key eq 'ARGS'; my($v) = neatvalue($configure_att{$key}); $v =~ s/(CODE|HASH|ARRAY|SCALAR)\([\dxa-f]+\)/$1\(...\)/; $v =~ tr/\n/ /s; push @{$self->{RESULT}}, "# $key => $v"; } } else { push @{$self->{RESULT}}, "# no values returned"; } undef %configure_att; # free memory } # turn the SKIP array into a SKIPHASH hash for my $skip (@{$self->{SKIP} || []}) { $self->{SKIPHASH}{$skip} = 1; } delete $self->{SKIP}; # free memory if ($self->{PARENT}) { for (qw/install dist dist_basics dist_core distdir dist_test dist_ci/) { $self->{SKIPHASH}{$_} = 1; } } # We run all the subdirectories now. They don't have much to query # from the parent, but the parent has to query them: if they need linking! unless ($self->{NORECURS}) { $self->eval_in_subdirs if @{$self->{DIR}}; } foreach my $section ( @MM_Sections ){ # Support for new foo_target() methods. my $method = $section; $method .= '_target' unless $self->can($method); print "Processing Makefile '$section' section\n" if ($Verbose >= 2); my($skipit) = $self->skipcheck($section); if ($skipit){ push @{$self->{RESULT}}, "\n# --- MakeMaker $section section $skipit."; } else { my(%a) = %{$self->{$section} || {}}; push @{$self->{RESULT}}, "\n# --- MakeMaker $section section:"; push @{$self->{RESULT}}, "# " . join ", ", %a if $Verbose && %a; push @{$self->{RESULT}}, $self->maketext_filter( $self->$method( %a ) ); } } push @{$self->{RESULT}}, "\n# End."; $self; } sub WriteEmptyMakefile { Carp::croak "WriteEmptyMakefile: Need an even number of args" if @_ % 2; my %att = @_; my $self = MM->new(\%att); my $new = $self->{MAKEFILE}; my $old = $self->{MAKEFILE_OLD}; if (-f $old) { _unlink($old) or warn "unlink $old: $!"; } if ( -f $new ) { _rename($new, $old) or warn "rename $new => $old: $!" } open my $mfh, '>', $new or die "open $new for write: $!"; print $mfh <<'EOP'; all : clean : install : makemakerdflt : test : EOP close $mfh or die "close $new for write: $!"; } sub check_manifest { print STDOUT "Checking if your kit is complete...\n"; require ExtUtils::Manifest; # avoid warning $ExtUtils::Manifest::Quiet = $ExtUtils::Manifest::Quiet = 1; my(@missed) = ExtUtils::Manifest::manicheck(); if (@missed) { print STDOUT "Warning: the following files are missing in your kit:\n"; print "\t", join "\n\t", @missed; print STDOUT "\n"; print STDOUT "Please inform the author.\n"; } else { print STDOUT "Looks good\n"; } } sub parse_args{ my($self, @args) = @_; foreach (@args) { unless (m/(.*?)=(.*)/) { ++$Verbose if m/^verb/; next; } my($name, $value) = ($1, $2); if ($value =~ m/^~(\w+)?/) { # tilde with optional username $value =~ s [^~(\w*)] [$1 ? ((getpwnam($1))[7] || "~$1") : (getpwuid($>))[7] ]ex; } # Remember the original args passed it. It will be useful later. $self->{ARGS}{uc $name} = $self->{uc $name} = $value; } # catch old-style 'potential_libs' and inform user how to 'upgrade' if (defined $self->{potential_libs}){ my($msg)="'potential_libs' => '$self->{potential_libs}' should be"; if ($self->{potential_libs}){ print STDOUT "$msg changed to:\n\t'LIBS' => ['$self->{potential_libs}']\n"; } else { print STDOUT "$msg deleted.\n"; } $self->{LIBS} = [$self->{potential_libs}]; delete $self->{potential_libs}; } # catch old-style 'ARMAYBE' and inform user how to 'upgrade' if (defined $self->{ARMAYBE}){ my($armaybe) = $self->{ARMAYBE}; print STDOUT "ARMAYBE => '$armaybe' should be changed to:\n", "\t'dynamic_lib' => {ARMAYBE => '$armaybe'}\n"; my(%dl) = %{$self->{dynamic_lib} || {}}; $self->{dynamic_lib} = { %dl, ARMAYBE => $armaybe}; delete $self->{ARMAYBE}; } if (defined $self->{LDTARGET}){ print STDOUT "LDTARGET should be changed to LDFROM\n"; $self->{LDFROM} = $self->{LDTARGET}; delete $self->{LDTARGET}; } # Turn a DIR argument on the command line into an array if (defined $self->{DIR} && ref \$self->{DIR} eq 'SCALAR') { # So they can choose from the command line, which extensions they want # the grep enables them to have some colons too much in case they # have to build a list with the shell $self->{DIR} = [grep $_, split ":", $self->{DIR}]; } # Turn a INCLUDE_EXT argument on the command line into an array if (defined $self->{INCLUDE_EXT} && ref \$self->{INCLUDE_EXT} eq 'SCALAR') { $self->{INCLUDE_EXT} = [grep $_, split '\s+', $self->{INCLUDE_EXT}]; } # Turn a EXCLUDE_EXT argument on the command line into an array if (defined $self->{EXCLUDE_EXT} && ref \$self->{EXCLUDE_EXT} eq 'SCALAR') { $self->{EXCLUDE_EXT} = [grep $_, split '\s+', $self->{EXCLUDE_EXT}]; } foreach my $mmkey (sort keys %$self){ next if $mmkey eq 'ARGS'; print STDOUT " $mmkey => ", neatvalue($self->{$mmkey}), "\n" if $Verbose; print STDOUT "'$mmkey' is not a known MakeMaker parameter name.\n" unless exists $Recognized_Att_Keys{$mmkey}; } $| = 1 if $Verbose; } sub check_hints { my($self) = @_; # We allow extension-specific hints files. require File::Spec; my $curdir = File::Spec->curdir; my $hint_dir = File::Spec->catdir($curdir, "hints"); return unless -d $hint_dir; # First we look for the best hintsfile we have my($hint)="${^O}_$Config{osvers}"; $hint =~ s/\./_/g; $hint =~ s/_$//; return unless $hint; # Also try without trailing minor version numbers. while (1) { last if -f File::Spec->catfile($hint_dir, "$hint.pl"); # found } continue { last unless $hint =~ s/_[^_]*$//; # nothing to cut off } my $hint_file = File::Spec->catfile($hint_dir, "$hint.pl"); return unless -f $hint_file; # really there _run_hintfile($self, $hint_file); } sub _run_hintfile { our $self; local($self) = shift; # make $self available to the hint file. my($hint_file) = shift; local($@, $!); print STDERR "Processing hints file $hint_file\n"; # Just in case the ./ isn't on the hint file, which File::Spec can # often strip off, we bung the curdir into @INC local @INC = (File::Spec->curdir, @INC); my $ret = do $hint_file; if( !defined $ret ) { my $error = $@ || $!; print STDERR $error; } } sub mv_all_methods { my($from,$to) = @_; # Here you see the *current* list of methods that are overridable # from Makefile.PL via MY:: subroutines. As of VERSION 5.07 I'm # still trying to reduce the list to some reasonable minimum -- # because I want to make it easier for the user. A.K. local $SIG{__WARN__} = sub { # can't use 'no warnings redefined', 5.6 only warn @_ unless $_[0] =~ /^Subroutine .* redefined/ }; foreach my $method (@Overridable) { # We cannot say "next" here. Nick might call MY->makeaperl # which isn't defined right now # Above statement was written at 4.23 time when Tk-b8 was # around. As Tk-b9 only builds with 5.002something and MM 5 is # standard, we try to enable the next line again. It was # commented out until MM 5.23 next unless defined &{"${from}::$method"}; { no strict 'refs'; ## no critic *{"${to}::$method"} = \&{"${from}::$method"}; # If we delete a method, then it will be undefined and cannot # be called. But as long as we have Makefile.PLs that rely on # %MY:: being intact, we have to fill the hole with an # inheriting method: { package MY; my $super = "SUPER::".$method; *{$method} = sub { shift->$super(@_); }; } } } # We have to clean out %INC also, because the current directory is # changed frequently and Graham Barr prefers to get his version # out of a History.pl file which is "required" so woudn't get # loaded again in another extension requiring a History.pl # With perl5.002_01 the deletion of entries in %INC caused Tk-b11 # to core dump in the middle of a require statement. The required # file was Tk/MMutil.pm. The consequence is, we have to be # extremely careful when we try to give perl a reason to reload a # library with same name. The workaround prefers to drop nothing # from %INC and teach the writers not to use such libraries. # my $inc; # foreach $inc (keys %INC) { # #warn "***$inc*** deleted"; # delete $INC{$inc}; # } } sub skipcheck { my($self) = shift; my($section) = @_; if ($section eq 'dynamic') { print STDOUT "Warning (non-fatal): Target 'dynamic' depends on targets ", "in skipped section 'dynamic_bs'\n" if $self->{SKIPHASH}{dynamic_bs} && $Verbose; print STDOUT "Warning (non-fatal): Target 'dynamic' depends on targets ", "in skipped section 'dynamic_lib'\n" if $self->{SKIPHASH}{dynamic_lib} && $Verbose; } if ($section eq 'dynamic_lib') { print STDOUT "Warning (non-fatal): Target '\$(INST_DYNAMIC)' depends on ", "targets in skipped section 'dynamic_bs'\n" if $self->{SKIPHASH}{dynamic_bs} && $Verbose; } if ($section eq 'static') { print STDOUT "Warning (non-fatal): Target 'static' depends on targets ", "in skipped section 'static_lib'\n" if $self->{SKIPHASH}{static_lib} && $Verbose; } return 'skipped' if $self->{SKIPHASH}{$section}; return ''; } sub flush { my $self = shift; my $finalname = $self->{MAKEFILE}; print STDOUT "Writing $finalname for $self->{NAME}\n"; unlink($finalname, "MakeMaker.tmp", $Is_VMS ? 'Descrip.MMS' : ()); open(my $fh,">", "MakeMaker.tmp") or die "Unable to open MakeMaker.tmp: $!"; for my $chunk (@{$self->{RESULT}}) { print $fh "$chunk\n"; } close $fh; _rename("MakeMaker.tmp", $finalname) or warn "rename MakeMaker.tmp => $finalname: $!"; chmod 0644, $finalname unless $Is_VMS; my %keep = map { ($_ => 1) } qw(NEEDS_LINKING HAS_LINK_CODE); if ($self->{PARENT} && !$self->{_KEEP_AFTER_FLUSH}) { foreach (keys %$self) { # safe memory delete $self->{$_} unless $keep{$_}; } } system("$Config::Config{eunicefix} $finalname") unless $Config::Config{eunicefix} eq ":"; } # This is a rename for OS's where the target must be unlinked first. sub _rename { my($src, $dest) = @_; chmod 0666, $dest; unlink $dest; return rename $src, $dest; } # This is an unlink for OS's where the target must be writable first. sub _unlink { my @files = @_; chmod 0666, @files; return unlink @files; } # The following mkbootstrap() is only for installations that are calling # the pre-4.1 mkbootstrap() from their old Makefiles. This MakeMaker # writes Makefiles, that use ExtUtils::Mkbootstrap directly. sub mkbootstrap { die <".neatvalue($val)) ; } return "{ ".join(', ',@m)." }"; } sub selfdocument { my($self) = @_; my(@m); if ($Verbose){ push @m, "\n# Full list of MakeMaker attribute values:"; foreach my $key (sort keys %$self){ next if $key eq 'RESULT' || $key =~ /^[A-Z][a-z]/; my($v) = neatvalue($self->{$key}); $v =~ s/(CODE|HASH|ARRAY|SCALAR)\([\dxa-f]+\)/$1\(...\)/; $v =~ tr/\n/ /s; push @m, "# $key => $v"; } } join "\n", @m; } 1; __END__ #line 2637