1. Installing SDF
=================
1.1. Overview
-------------
If SDF is not yet installed, you will need to fetch it and install it.
The latest version of SDF can be fetched from the SDF download page,
http://www.mincom.com/mtr/sdf/download.html.
If Perl is not installed, you will also need to fetch and install it.
Various ports of Perl can be obtained from the Perl Home Page
(http://www.perl.com/index/).
SDF installation details are provided below for:
o Unix
o Windows NT
o Windows 95
o MS-DOS/Windows 3.x.
Some general Installation Notes are also provided.
1.2. Unix
---------
Use the tar and gunzip programs to unpack the distribution like this:
gunzip sdf-2.000.tar.gz
tar xvf sdf-2.000.tar
Build, test and install the software like this:
perl Makefile.PL
make
make test
make install
1.3. Windows NT
---------------
Unpack the distribution using a program which understands long file
names (e.g. WinZip).
Within the Control Panel, go to the System properties, select the
Environment tab and edit the variables as follows:
1. Update the PATH to include the bin\dos directory where SDF is
installed.
For example, if SDF is installed in c:\sdf, then you need to edit
the PATH system variable to include c:\sdf\bin\dos.
2. Edit (or add) the PERL5LIB variable to include the Perl libraries
used by SDF.
For example, if SDF is installed in c:\sdf, then you need to edit
the PERL5LIB variable to include c:\sdf\perllib.
3. Set the SDFBIN variable to point to the directory containing
SDF's scripts, including the trailing \.
For example, if SDF is installed in c:\sdf, then you need to set
the SDFBIN variable to c:\sdf\bin\.
Test the software. To do this:
1. Start an MS-DOS window.
2. Change directory to the t directory within the SDF distribution.
3. Run sdf without any arguments to confirm that SDF was
successfully installed.
4. Run sdftest.
If anything fails, sdftest will leave the failed .out and .log files
in the relevant directories.
1.4. Windows 95
---------------
Unpack the distribution using a program which understands long file
names (e.g. WinZip).
Update the PATH to include the bin\dos directory where SDF is
installed. For example, if SDF is installed in c:\sdf, then the
command is:
set PATH=%PATH%;c:\sdf\bin\dos
Edit (or add) the PERL5LIB system variable to include the Perl
libraries used by SDF. For example, if SDF is installed in c:\sdf,
then the command is:
set PERL5LIB=%PERL5LIB%;c:\sdf\perllib
Set the SDFBIN variable to point to the directory containing SDF's
scripts, including the trailing \. For example, if SDF is installed in
c:\sdf, then the command is:
set SDFBIN=c:\sdf\bin\
Test the software. To do this:
1. Change directory to the t directory within the SDF distribution.
2. Run sdf without any arguments to confirm that SDF was
successfully installed.
3. Run sdftest.
If anything fails, sdftest will leave the failed .out and .log files
in the relevant directories.
Note: PATH, PERL5LIB and SDFBIN should be set within your autoexec.bat
file.
1.5. MS-DOS/Windows 3.x
-----------------------
Use pkunzip to unpack the distribution. The command is:
pkunzip -d sdf.zip
Update the PATH to include the bin\dos directory where SDF is
installed. For example, if SDF is installed in c:\sdf, then the
command is:
set PATH=%PATH%;c:\sdf\bin\dos
Edit (or add) the PERL5LIB system variable to include the Perl
libraries used by SDF. For example, if SDF is installed in c:\sdf,
then the command is:
set PERL5LIB=%PERL5LIB%;c:\sdf\perllib
Set the SDFBIN variable to point to the directory containing SDF's
scripts, including the trailing \. For example, if SDF is installed in
c:\sdf, then the command is:
set SDFBIN=c:\sdf\bin\
Test the software. To do this:
1. Change directory to the t directory within the SDF distribution.
2. Run sdf without any arguments to confirm that SDF was
successfully installed.
3. Run sdftest.
If anything fails, sdftest will leave the failed .out and .log files
in the relevant directories.
Note: PATH, PERL5LIB and SDFBIN should be set within your autoexec.bat
file.
1.6. Installation Notes
-----------------------
1.6.1. Distribution Formats
---------------------------
The tar.gz and zip distributions should both contain the same set of
files. Therefore, it shouldn't matter which distribution you obtain
provided you have the necessary software to unpack it.
1.6.2. The sdf.ini File
-----------------------
The sdf.ini configuration file (in the sdf/home directory on Perl's
library path) contains several sets of configuration parameters which
you may want to edit after SDF is installed. Refer to the comments in
the file for further details.
1.6.3. Win32 Support
--------------------
SDF has been briefly tested with:
o Gurusamy Sarathy's 5.004_02 Perl port (August 97), and
o ActiveState's Perl port build 315 (based on 5.003_07).
Both seem to work ok, although running sdftest with the 5.004_02 port
leaves zero length .out and .log files for the tests which work (when
they should be deleted).
1.6.4. The SDFBIN Environment Variable
--------------------------------------
This environment variable is only used by the Windows/DOS wrapper
batch files within bin/dos to find the real scripts. Therefore, if you
wish to wrap the scripts in some other way, then there is no need to
set this variable.
1.6.5. Macintosh support
------------------------
Unlike earlier versions, the 2.000 release includes support for
Macintosh filename handling. Installation instructions for the
Macintosh will be made available soon.
1.6.6. Testing Notes
--------------------
When the sdf command is run without arguments, the output should be
something like:
usage : sdf [+alias] [-h[help]] [-o[out_ext]] [-l[log_ext]] [-2 format] [-D var
iable,..] [-n split_level] [-f flag,..] [-I include_path,..] [-p prefilter] [-a
parameters] [-P[plang]] [-N[line_numbers]] [-r report] [-L locale] [-k look] [-s
style] [-S page_size] [-c config] [-u uses,..] [-H head_level] [-d driver] [-y
post_filter] [-z post_process,..] [-t target] [-v[verbose]] [-w width] sdf_file
...
purpose: convert an sdf file to another format
version: 2.000 (SDF 2.000)
If this fails, check the following:
1. perl 5.003 or later is installed (type perl -v to test)
2. the sdf script is on your path and under Unix, is executable.
SDF is supplied with a regression testing system. To run the tests,
change to the t directory within the SDF distribution and execute
sdftest like this:
sdftest
This command can be used at anytime to verify your installation of
SDF.
The SDF Sample Showcase contains SDF source code and matching outputs.
If you wish to conduct further tests, these samples can be used.