WebMake
WebMake Documentation (version 2.2)

Setting up CVS and ssh for webmake.cgi HOWTO

This document covers setting up Webmake with CVS and SSH. It's quite complicated, but the end result is worth it, providing version control and replication of your site.

WHAT YOU WILL NEED

You will require a CVS server machine (one with a permanent internet connection if possible). This is where the CVS repository will live. The repository is the central store for all CVS-controlled documents.

Then you will need at least one client machine (it could be the same computer, of course). Each client machine will have a copy of the website, checked out from the CVS repository. Initially, you'll use one of the clients to import the website into CVS.

The client machines need to be able to connect to the server machine over the network; and if you're planning to use webmake.cgi, they need to be able to do this without passwords. To do this securely, you'll need to set up an SSH server and clients, and generate public/private key pairs. I'll cover some of this where possible, but you need to be familiar with SSH in general.

(You don't strictly need to use SSH, but it allows multiple copies of the same site across the net, and allows changes made on any of the sites to be automatically replicated to all the others. This is obviously quite handy! However, if you don't want to use SSH, you'll still get the benefits of keeping the site under version control.)

WARNING: as part of this procedure, you will need to allow CGI scripts on the client machine to run cvs commands on the server machine. If an attacker subverted the client machine, they may be able to use this to gain shell access to your account on the server machine. If this is a problem, it would probably be better not to set up webmake.cgi.

When illustrating the commands needed to run this, I'll use my username and my hostnames. Wherever you see jm, replace with your username, wherever you see localhost, replace with your server's hostname, and wherever you see /cvsroot, replace with the path to your CVS repository on the server.

CREATING THE REPOSITORY

First of all, create the repository on the CVS server machine.


                          
	mkdir /cvsroot;
	cvs -d /cvsroot init

                                                  

SETTING UP SSH

On a client machine, install the SSH client ("ssh"), and install the SSH server ("sshd") on the server machine. Set them up (as described in the ssh documentation).

Next, if you haven't done this before, generate an ssh key pair for yourself on all machines:


                        
	ssh-keygen -P "" -N ""

                                              

When it asks for the filenames to save the keys in, hit Enter to accept the defaults.

Any machines you plan to run webmake.cgi on, you will also need to generate a key-pair for, so that the user the web server runs CGI scripts as will be able to communicate without passwords. Here's how (run these as root):


                      
	mkdir ~apache/.ssh
	chmod 700 ~apache/.ssh
	chown apache ~apache/.ssh
	su apache -s/bin/sh -c 'ssh-keygen -P "" -N ""'

                                          

This will generate a public/private key-pair for the web server user. Note that the user the web server runs as on your UNIX may be different (httpd, www, or nobody are common usernames for it); in that case replace apache with the correct username.

Don't worry; the keys you've set up will not compromise your server's security, as the SSH daemon will not allow anyone to log in as the web server user, since they have a no-login shell.

SETTING UP NO-PASSWORD LOGINS

This is optional for editing the site by hand using CVS, but if you're using webmake.cgi, it will require that this works.

Here's how to set it up for webmake.cgi. Get the public key you just generated for the web user (run this as root):


                    
  	cat ~apache/.ssh/identity.pub

                                      

you should get a long stream of gibberish starting with "1024" and ending with a hostname; that's the public key. Here's mine:


                  
	1024 35
	15059408357788156311432762154619731093579709369085525651528959
	33782159340399119075502495847161401527101834823731504521848289
	07097066749035812105735673062224184578113153987480874569311840
	34611043915547598874334739513173936291615348136113929611666395
	3155785517017739076839134463214021324783262900267823081443889
	apache@mmmkay

                                  

On the server, create a file called authorized_keys in your ~/.ssh directory:


                
	vi ~/.ssh/authorized_keys

                              

and add this line to to it:


              
  	command="cvs server",no-port-forwarding,no-pty ...yourpublickey...

                          

This will allow CGI scripts on the client machine to access cvs on the server machine. Add similar lines for any other machines which need access to the CVS repository.

Make sure it's read-write only by you, and unreadable to anyone else:


            
	chmod 0600 ~/.ssh/authorized_keys

                      

Setting up no-password logins for manual editing is similar -- but instead of reading the public key from ~apache/identity.pub, read it from ~/.ssh/identity.pub, and leave out the command="command" part when adding it to ~/.ssh/authorized_keys on the server-side.

Next, try it out. This is required to initialise the client account with a host key for the server, and if you omit this step, the CGI script will not be able to update or check in code.


          
	echo test | su apache -s/bin/sh -c 'ssh jm@localhost cvs server'

                  

It will ask you if you wish to accept the host key for server localhost. Type "yes" and hit Enter. If all goes well, you should see:


        
error  unrecognized request `test'

              

Important: you should not be prompted for a password. If you are prompted for one, check that the correct key has been entered in the authorized_keys file.

IMPORTING THE SITE INTO CVS

On a client machine, do this:


      
	export CVS_RSH=ssh

          

If possible, add this to your startup scripts (.bashrc or .cshrc), so you can't forget to set it. All further CVS commands in this document assume this environment variable is set.

Create a WebMake XML configuration file for the site, if one is not already present. webmake.cgi will require that a site has a .wmk file.

Now, run the "webmake_cvs_import" script. This script is a wrapper around the "cvs import" command which ensures that binary files (such as images etc.) are imported into CVS correctly.

You need to provide a name for the CVS module. I'm using jmason.org in this example. You should pick a name that makes sense; I typically use the host name of the site I'm importing.


    
	webmake_cvs_import jm@localhost:/cvsroot jmason.org

      

Assuming this works, move on to CHECKING OUT THE SITE, below. (Keep a copy of the original site tree around just in case!)

CHECKING OUT THE SITE

On the clients, create a directory for webmake.cgi to work in, in the web server's HTML tree, then check out the CVS tree:


  
	mkdir /var/www/html/jmason.org
	cd /var/www/html/jmason.org
	cvs -d :ext:jm@localhost:/cvsroot checkout jmason.org

  

Note: cvs checkout has a few idiosyncrasies; notably, the directory you're checking out must not exist in your filesystem, otherwise it will not populate it with the CVS data files it requires to do check-ins and updates later.

Also, this directory must have the same name it has in the CVS repository (jmason.org in the example above). We don't want that, so move them nearer:


  
	mv jmason.org/* . ; rmdir jmason.org

  

then, as root,


  
	chown -R apache /var/www/html/jmason.org

  

so that webmake.cgi can read and write the files. (You could also chgrp them to www or whatever the web server user uses as its gid, and chmod -R g+w them.)

Next, copy the "webmake.cgi" script to your web server's cgi-bin directory:


  
	cp webmake.cgi /cgi-bin/editsite.cgi

  

and edit the top of the script. You need to set these variables:


  
	$FILE_BASE = '/var/www/html/jmason.org';

  

Note that if you've adopted the same convention as I use for the module name, you can use _ _HOST_ _ as a shortcut in this line to mean the hostname of the site being edited. This is handy, as it allows you to use the same CGI script to edit multiple sites, in different virtual servers.

Load up http://localhost/cgi-bin/editsite.cgi in a web browser, and it should have worked; you should see a list of "sites" (ie. .wmk files) to choose from.

Try clicking on a site, scroll down to the bottom of the page, and click on the "[Update From CVS]" link. You should see a page of cvs messages, indicating that the site has been updated from the latest CVS checked-in version.

If this works without errors, you're now set up. Set up as many more clients as you like!

More info on CVS can be found here.

WebMake Documentation (version 2.2)
Built With WebMake