Radius/Packet.pm - metacpan.org

package Net::Radius::Packet;

use strict;
require Exporter;
use vars qw($VERSION @ISA @EXPORT @EXPORT_OK $VSA);
@ISA       = qw(Exporter);
@EXPORT    = qw(auth_resp auth_acct_verify auth_req_verify);
@EXPORT_OK = qw( );

$VERSION = '1.55';

$VSA = 26;			# Type assigned in RFC2138 to the 
				# Vendor-Specific Attributes

# Be sure our dictionaries are current
use Net::Radius::Dictionary 1.50;
use Carp;
use Socket;
use Digest::MD5;

my (%unkvprinted, %unkgprinted);

sub new {
  my ($class, $dict, $data) = @_;
  my $self = { unknown_entries => 1 };
  bless $self, $class;
  $self->set_dict($dict) if defined($dict);
  $self->unpack($data) if defined($data);
  return $self;
}

# Set the dictionary
sub set_dict {
  my ($self, $dict) = @_;
  $self->{Dict} = $dict;
}

# Functions for accessing data structures
sub code          { $_[0]->{Code};          				}
sub identifier    { $_[0]->{Identifier};    				}
sub authenticator { $_[0]->{Authenticator}; 				}

sub set_code          { $_[0]->{Code} = $_[1];          		}
sub set_identifier    { $_[0]->{Identifier} = $_[1];    		}
sub set_authenticator { $_[0]->{Authenticator} = substr($_[1] 
							. "\x0" x 16, 
							0, 16); 	}

sub vendors      { keys %{$_[0]->{VSAttributes}};			}
sub vsattributes { keys %{$_[0]->{VSAttributes}->{$_[1]}};		}
sub vsattr       { $_[0]->{VSAttributes}->{$_[1]}->{$_[2]};		}
sub set_vsattr   { 
    my ($self, $vendor, $name, $value, $rewrite_flag) = @_;
    $self->{VSAttributes}->{$vendor} = {} unless exists($self->{VSAttributes}->{$vendor});
    my $attr = $self->{VSAttributes}->{$vendor};

    if ($rewrite_flag) {
	my $found = 0;

	if (exists($attr->{$name})) {
	    $found = $#{$attr->{$name}} + 1;
        }

	if ($found == 1) {
	    $attr->{$name}[0] = $value;
	    return;
	}    
    }

    push @{$attr->{$name}}, $value;
}

sub unset_vsattr {
    my ($self, $vendor, $name) = @_;

    delete($self->{VSAttributes}->{$name});
}

sub show_unknown_entries { $_[0]->{unknown_entries} = $_[1]; 		}

sub set_attr 
{
    my ($self, $name, $value, $rewrite_flag) = @_;
    my ($push, $pos );

    $push = 1 unless $rewrite_flag;

    if ($rewrite_flag) {
        my $found = 0;
        my @attr = $self->_attributes;

        for (my $i = 0; $i <= $#attr; $i++ ) {
            if ($attr[$i][0] eq $name) {
                $found++;
                $pos = $i;
            }
        }

        if ($found > 1) {
            $push = 1;
        } elsif ($found) {
            $attr[$pos][0] = $name;
            $attr[$pos][1] = $value;
            $self->_set_attributes( \@attr );
            return;
        } else {
            $push = 1;
        }
    }

    $self->_push_attr( $name, $value ) if $push;
}

sub attr
{
    my ($self, $name ) = @_;
    
    my @attr = $self->_attributes;
    
    for (my $i = $#attr; $i >= 0; $i-- ) {
        return $attr[$i][1] if $attr[$i][0] eq $name;
    }
    return;
}

sub attributes {
    my ($self) = @_;
    
    my @attr = $self->_attributes;
    my @attriblist = ();
    for (my $i = $#attr; $i >= 0; $i-- ) {
        push @attriblist, $attr[$i][0];
    }
    return @attriblist;
}

sub unset_attr 
{
    my ($self, $name, $value ) = @_;
    
    my $found;
    my @attr = $self->_attributes;

    for (my $i = 0; $i <= $#attr; $i++ ) {
        if ( $name eq $attr[$i][0] && $value eq $attr[$i][1])
	{
            $found = 1;
	    if ( $#attr == 0 ) {
		# no more attributes left on the stack
		$self->_set_attributes( [ ] );
	    } else {
		splice @attr, $i, 1;
		$self->_set_attributes( \@attr );
	    }
            return 1;
        }
    }
    return 0;
}

# XXX - attr_slot is deprecated - Use attr_slot_* instead
sub attr_slot		{ attr_slot_val($@); }

sub attr_slots { scalar ($_[0]->_attributes); }

sub attr_slot_name
{ 
    my $self = shift;
    my $slot = shift;
    my @stack = $self->_attributes;

    return unless exists $stack[$slot];
    return unless exists $stack[$slot]->[0];
    $stack[$slot]->[0];
}

sub attr_slot_val
{ 
    my $self = shift;
    my $slot = shift;
    my @stack = $self->_attributes;

    return unless exists $stack[$slot];
    return unless exists $stack[$slot]->[0];
    $stack[$slot]->[1];
}

sub unset_attr_slot {
    my ($self, $position ) = @_;

    my @attr = $self->_attributes;

    if ( not $position > $#attr ) {
        splice @attr, $position, 1;
        $self->_set_attributes( \@attr );
        return 1;
    } else {
        return;
    }

}

# 'Attributes' is now array of arrays, so that we can have multiple
# Proxy-State values in the order in which they were added,
# as specified in RFC 2865
sub _attributes     { @{ $_[0]->{Attributes} || [] }; }
sub _set_attributes { $_[0]->{Attributes} = $_[1]; }
sub _push_attr      { push @{ $_[0]->{Attributes} }, [ $_[1], $_[2] ]; }

# Decode the password
sub password {
  my ($self, $secret, $attr) = @_;
  my $lastround = $self->authenticator;
  my $pwdin = $self->attr($attr || "User-Password");
  my $pwdout = ""; # avoid possible undef warning
  for (my $i = 0; $i < length($pwdin); $i += 16) {
    $pwdout .= substr($pwdin, $i, 16) ^ Digest::MD5::md5($secret . $lastround);
    $lastround = substr($pwdin, $i, 16);
  }
  $pwdout =~ s/\000*$// if $pwdout;
    substr($pwdout,length($pwdin)) = "" 
	unless length($pwdout) <= length($pwdin);
  return $pwdout;
}

# Encode the password
sub set_password {
  my ($self, $pwdin, $secret, $attribute) = @_;
  $attribute ||= 'User-Password';
  my $lastround = $self->authenticator;
  my $pwdout = ""; # avoid possible undef warning
  $pwdin .= "\000" x (15-(15 + length $pwdin)%16);     # pad to 16n bytes

  for (my $i = 0; $i < length($pwdin); $i += 16) {
    $lastround = substr($pwdin, $i, 16) 
      ^ Digest::MD5::md5($secret . $lastround);
    $pwdout .= $lastround;
  }
  $self->set_attr($attribute => $pwdout, 1);
}

# Set response authenticator in binary packet
sub auth_resp {
  my $new = $_[0];
  if ($_[2])
  {  substr($new, 4, 16) = Digest::MD5::md5(substr($_[0], 0, 4) . 
					    "\x0" x 16 . substr($_[0], 20) . 
					    $_[1]); }
  else { substr($new, 4, 16) = Digest::MD5::md5($_[0] . $_[1]); }
  return $new;
}

# Verify the authenticator in a packet
sub auth_acct_verify { auth_req_verify(@_, "\x0" x 16); }
sub auth_req_verify
{
    my ($packet, $secret, $prauth) = @_;

    return 1 if Digest::MD5::md5(substr($packet, 0, 4) . $prauth 
				 . substr($packet, 20) . $secret)
	eq substr($packet, 4, 16);
    return;
}

# Utility functions for printing/debugging
sub pdef { defined $_[0] ? $_[0] : "UNDEF"; }
sub pclean {
  my $str = $_[0];
  $str =~ s/([\044-\051\133-\136\140\173-\175])/'\\' . $1/ge;
  $str =~ s/([\000-\037\177-\377])/sprintf('\x{%x}', ord($1))/ge;
  return $str;
}

sub dump {
    print str_dump(@_);
}

sub str_dump {
  my $self = shift;
  my $ret = '';
  $ret .= "*** DUMP OF RADIUS PACKET ($self)\n";
  $ret .= "Code:       ". pdef($self->{Code}). "\n";
  $ret .= "Identifier: ". pdef($self->{Identifier}). "\n";
  $ret .= "Authentic:  ". pclean(pdef($self->{Authenticator})). "\n";
  $ret .= "Attributes:\n";

  for (my $i = 0; $i < $self->attr_slots; ++$i)
  {
      $ret .= sprintf("  %-20s %s\n", $self->attr_slot_name($i) . ":" , 
		    pclean(pdef($self->attr_slot_val($i))));
  }

  foreach my $vendor ($self->vendors) {
    $ret .= "VSA for vendor $vendor\n";
    foreach my $attr ($self->vsattributes($vendor)) {
      $ret .= sprintf("    %-20s %s\n", $attr . ":" ,
		      pclean(join("|", @{$self->vsattr($vendor, $attr)})));
    }
  }
  $ret .= "*** END DUMP\n";
  return $ret;
}

sub pack {
  my $self = shift;
  my $hdrlen = 1 + 1 + 2 + 16;    # Size of packet header
  my $p_hdr  = "C C n a16 a*";    # Pack template for header
  my $p_attr = "C C a*";          # Pack template for attribute
  my $p_vsa  = "C C N C C a*";	  # VSA

  # XXX - The spec says that a
  # 'Vendor-Type' must be included
  # but there are no documented definitions
  # for this! We'll simply skip this value

  my $p_vsa_3com  = "C C N N a*";    

  my %codes  = $self->{Dict}->packet_numbers();
  my $attstr = "";                # To hold attribute structure
  # Define a hash of subroutine references to pack the various data types
  my %packer = (
		"octets" => sub { return $_[0]; },
		"string" => sub { return $_[0]; },
		"ipv6addr" => sub { return $_[0]; },
		"date" => sub { return $_[0]; },
		"ifid" => sub { return $_[0]; },
		"integer" => sub {
		    return pack "N",
		    (
		     defined $self->{Dict}->attr_has_val($_[1]) &&
		     defined $self->{Dict}->val_num(@_[1, 0])
		     ) 
			? $self->{Dict}->val_num(@_[1, 0]) 
			: $_[0];
		},
		"ipaddr" => sub {
		    return inet_aton($_[0]);
		},
		"time" => sub {
		    return pack "N", $_[0];
		},
		"date" => sub {
		    return pack "N", $_[0];
		},
		"tagged-string" => sub { 
		    return $_[0]; 
		},
		"tagged-integer" => sub {
		    return $_[0];
		},
		"tagged-ipaddr" => sub {
		    my ($tag,$val)=unpack "C a*",$_[0];
		    return pack "C N" , $tag , inet_aton($val);
		});

  my %vsapacker = (
		   "octets" => sub { return $_[0]; },
		   "string" => sub { return $_[0]; },
		   "ipv6addr" => sub { return $_[0]; },
		   "date" => sub { return $_[0]; },
		   "ifid" => sub { return $_[0]; },
		   "integer" => sub {
		       my $vid = $self->{Dict}->vendor_num($_[2]) || $_[2];
		       return pack "N", 
		       (defined $self->{Dict}->vsattr_has_val($vid, $_[1])
			&& defined $self->{Dict}->vsaval_num($vid, @_[1, 0]) 
			) ?  $self->{Dict}->vsaval_num($vid, @_[1, 0]) : $_[0];
		   },
		   "ipaddr" => sub {
		       return inet_aton($_[0]);
		   },
		   "time" => sub {
		       return pack "N", $_[0];
		   },
		   "date" => sub {
		       return pack "N", $_[0];
		   },
		   "tagged-string" => sub { 
		       return $_[0]; 
		   },
		   "tagged-integer" => sub {
		       return $_[0];
		   },
		   "tagged-ipaddr" => sub {
		       my ($tag,$val)=unpack "C a*",$_[0];
		       return pack "C a*" , $tag , inet_aton($val);
		   });
    
  # Pack the attributes
  for (my $i = 0; $i < $self->attr_slots; ++$i)
  {
      my $attr = $self->attr_slot_name($i);
      if (! defined $self->{Dict}->attr_num($attr))
      {
	  carp("Unknown RADIUS tuple $attr => " . $self->attr_slot_val($i) 
	       . "\n")
	      if ($self->{unknown_entries});
	  next;
      }
      
      next unless ref($packer{$self->{Dict}->attr_type($attr)}) eq 'CODE';

      my $val = &{$packer{$self->{Dict}->attr_type($attr)}}
      ($self->attr_slot_val($i), $self->{Dict} ->attr_num($attr));

      $attstr .= pack $p_attr, $self->{Dict}->attr_num($attr),
      length($val)+2, $val;
  }

  # Pack the Vendor-Specific Attributes

  foreach my $vendor ($self->vendors) 
  {
      my $vid = $self->{Dict}->vendor_num($vendor) || $vendor;
      foreach my $attr ($self->vsattributes($vendor)) {
	next unless ref($vsapacker{$self->{Dict}
				   ->vsattr_type($vid, $attr)}) 
            eq 'CODE';
      foreach my $datum (@{$self->vsattr($vendor, $attr)}) {
        my $vval = &{$vsapacker{$self->{'Dict'}->vsattr_type($vid, $attr)}}
        ($datum, $self->{'Dict'}->vsattr_num($vid, $attr), $vendor);
        
        if ($vid == 429) {

      		# As pointed out by Quan Choi,
      		# we need special code to handle the
      		# 3Com case - See RFC-2882, sec 2.3.1

	    $attstr .= pack $p_vsa_3com, 26, 
	    length($vval) + 10, $vid,
	    $self->{'Dict'}->vsattr_num($vid, $attr),
	    $vval;
        } 
	else 
	{
	    $attstr .= pack $p_vsa, 26, length($vval) + 8, $vid,
	    $self->{'Dict'}->vsattr_num($vid, $attr),
	    length($vval) + 2, $vval;
        }
      }
    }
  }

  # Prepend the header and return the complete binary packet
  return pack $p_hdr, $codes{$self->code}, $self->identifier,
  length($attstr) + $hdrlen, $self->authenticator,
  $attstr;
}

sub unpack {
  my ($self, $data) = @_;
  my $dict = $self->{Dict};
  my $p_hdr  = "C C n a16 a*";    # Pack template for header
  my $p_attr = "C C a*";          # Pack template for attribute
  my $p_taggedattr = "C C C a*";  # Pack template for tagged-attribute
  my %rcodes = $dict->packet_names();

  # Decode the header
  my ($code, $id, $len, $auth, $attrdat) = unpack $p_hdr, $data;

  # Generate a skeleton data structure to be filled in
  $self->set_code($rcodes{$code});
  $self->set_identifier($id);
  $self->set_authenticator($auth);

  # Functions for the various data types
  my %unpacker = 
	(
	 "string" => sub {
	     return $_[0];
	 },
	 "ipv6addr" => sub { return $_[0]; },
	 "date" => sub { return $_[0]; },
	 "ifid" => sub { return $_[0]; },
	 "octets" => sub {
	     return $_[0];
	 },
	 "integer" => sub {
	     my $num=unpack("N", $_[0]);
	     return ( defined $dict->val_has_name($_[1]) &&
		      defined $dict->val_name($_[1],$num) ) ?
		      $dict->val_name($_[1],$num) : $num ;
	 },
	 "ipaddr" => sub {
	     return length($_[0]) == 4 ? inet_ntoa($_[0]) : $_[0];
	 },
	 "address" => sub {
	     return length($_[0]) == 4 ? inet_ntoa($_[0]) : $_[0];
	 },
	 "time" => sub {
	     return unpack "N", $_[0];
	 },
	 "date" => sub {
	     return unpack "N", $_[0];
	 },
	 "tagged-string" => sub { 
	     my ($tag,$val) = unpack "a a*", $_[0]; 
	     return $val, $tag;
	 },
	 "tagged-integer" => sub {
	     my ($tag,$num) = unpack "a a*", $_[0];
	     return ( defined $dict->val_has_name($_[1]) &&
		      defined $dict->val_name($_[1],$num) ) ?
		      $dict->val_name($_[1],$num) : $num
		      ,$tag ;
	 },
	 "tagged-ipaddr" => sub {
	     my ( $tag, $num ) = unpack "a a*", $_[0];
	     return inet_ntoa($num), $tag;
	 });

  my %vsaunpacker = 
      ( 
	"octets" => sub {
	    return $_[0];
	},
	"string" => sub {
	    return $_[0];
	},
	"ipv6addr" => sub { return $_[0]; },
	"date" => sub { return $_[0]; },
	"ifid" => sub { return $_[0]; },
	"integer" => sub {
	    my $num=unpack("N", $_[0]);
	    return ( $dict->vsaval_has_name($_[2], $_[1]) 
		     && $dict->vsaval_name($_[2], $_[1],$num) )  
		? $dict->vsaval_name($_[2], $_[1], $num )
		: $num;
	},
	"ipaddr" => sub {
	    return length($_[0]) == 4 ? inet_ntoa($_[0]) : $_[0];
	},
	"address" => sub {
	    return length($_[0]) == 4 ? inet_ntoa($_[0]) : $_[0];
	},
	"time" => sub {
	    return unpack "N", $_[0];
	},
	"date" => sub {
	    return unpack "N", $_[0];
	},
	"tagged-string" => sub { 
	    my ($tag,$val) = unpack "a a*", $_[0]; 
	    return $val, $tag;
	},
	"tagged-integer" => sub {
	    my ( $tag, $num ) = unpack "a a*", $_[0];
	    return  ($dict->vsaval_has_name($_[2], $_[1]) 
		     && $dict->vsaval_name($_[2], $_[1],$num) 
		     )?$dict->vsaval_name($_[2], $_[1],$num):$num 
		     , $tag ;
	    
	},
	"tagged-ipaddr" => sub {
	    my ( $tag, $num ) = unpack "a a*", $_[0];
	    return inet_ntoa($num), $tag;
	});
  
  # Unpack the attributes
  while (length($attrdat)) 
  {
      my $length = unpack "x C", $attrdat;
      my ($type, $value) = unpack "C x a${\($length-2)}", $attrdat;
      if ($type == $VSA) {    # Vendor-Specific Attribute
	  my ($vid) = unpack "N", $value;
	  substr ($value, 0, 4) = "";
	  
	  while (length($value))
	  {
	      my ($vtype, $vlength) = unpack "C C", $value;
	      
	      # XXX - How do we calculate the length
	      # of the VSA? It's not defined!
	      
	      # XXX - 3COM seems to do things a bit differently. 
	      # The IF below takes care of that. This was contributed by 
	      # Ian Smith. Check the file CHANGES on this distribution for 
	      # more information.

	      my $vvalue;
	      if ($vid == 429)
	      {
		  ($vtype) = unpack "N", $value;
		  $vvalue = unpack "xxxx a${\($length-10)}", $value;
	      }
	      else
	      {
		  $vvalue = unpack "x x a${\($vlength-2)}", $value;
	      }

	      if ((not defined $dict->vsattr_numtype($vid, $vtype)) or 
		  (ref $vsaunpacker{$dict->vsattr_numtype($vid, $vtype)} 
		   ne 'CODE')) 
	      {
		  my $whicherr 
		      = (defined $dict->vsattr_numtype($vid, $vtype)) ?
		      "Garbled":"Unknown";
		  warn "$whicherr vendor attribute $vid/$vtype for unpack()\n"
		      unless $unkvprinted{"$vid/$vtype"};
		  $unkvprinted{"$vid/$vtype"} = 1;
		  substr($value, 0, $vlength) = ""; # Skip this section
		  next;
	      }
	      my ($val, $tag) = 
		  &{$vsaunpacker{$dict->vsattr_numtype($vid, $vtype)}}($vvalue,
								       $vtype,
								       $vid);
	      if ( defined $tag ) 
	      {
		  $val = "-emtpy-" unless defined $val;
		  $self->set_taggedvsattr($vid,
					  $dict->vsattr_name($vid, $vtype),
					  $val, 
					  $tag);
	      }
	      else 
	      {
		  $self->set_vsattr($vid, $dict->vsattr_name($vid, $vtype), 
				    $val);
	      }
	      substr($value, 0, $vlength) = "";
	  }
      }
      else 
      {            # Normal attribute
	  if ((not defined $dict->attr_numtype($type)) or
	      (ref ($unpacker{$dict->attr_numtype($type)}) ne 'CODE')) 
	  {
	      my $whicherr = (defined $dict->attr_numtype($type)) ?
		  "Garbled":"Unknown";
	      warn "$whicherr general attribute $type for unpack()\n"
		  unless $unkgprinted{$type};
	      $unkgprinted{$type} = 1;
	      substr($attrdat, 0, $length) = ""; # Skip this section
	      next;
	  }
	  my ($val,$tag) = &{$unpacker{$dict->attr_numtype($type)}}($value, 
								    $type);
	  if ( defined $tag ) {
	      if ( ! defined $val ) { $val = "-emtpy-" };
	      $self->set_taggedattr($dict->attr_name($type), $val , $tag);
	  }
	  else {
	      $self->set_attr($dict->attr_name($type), $val);
	  }
      }
      substr($attrdat, 0, $length) = ""; # Skip this section
  }
}

1;
__END__

=head1 NAME

Net::Radius::Packet - Object-oriented Perl interface to RADIUS packets

=head1 SYNOPSIS

  use Net::Radius::Packet;
  use Net::Radius::Dictionary;

  my $d = new Net::Radius::Dictionary "/etc/radius/dictionary";

  my $p = new Net::Radius::Packet $d, $data;
  $p->dump;

  if ($p->attr('User-Name' eq "lwall") {
    my $resp = new Net::Radius::Packet $d;
    $resp->set_code('Access-Accept');
    $resp->set_identifier($p->identifier);
    $resp->set_authenticator($p->authenticator);
    $resp->set_attr('Reply-Message' => "Welcome, Larry!\r\n");
    my $respdat = auth_resp($resp->pack, "mysecret");
    ...

  die "Packet is a fake response\n" if ($p->code eq 'Access-Accept'
    and not auth_req_verify($data, $secret, $req->authenticator))

  die "Packet is a fake\n" if ($p->code eq 'Accounting-Request'
    and not auth_acct_verify($data, $secret))

=head1 DESCRIPTION

RADIUS (RFC2138) specifies a binary packet format which contains
various values and attributes.  Net::Radius::Packet provides an
interface to turn RADIUS packets into Perl data structures and
vice-versa.

Net::Radius::Packet does not provide functions for obtaining RADIUS packets
from the network.  A simple network RADIUS server is provided as an
example at the end of this document.  

=head2 PACKAGE METHODS

=over 4

=item B<new Net::Radius::Packet $dictionary, $data>

Returns a new Net::Radius::Packet object. C<$dictionary> is an
optional reference to a Net::Radius::Dictionary object.  If not
supplied, you must call B<set_dict>.

If C<$data> is supplied, B<unpack> will be called for you to
initialize the object.

=back

=head2 Proxy-State, RFC specification

From RFC-2865:

  2. Operation
  
  If any Proxy-State attributes were present in the Access-Request,
  they MUST be copied unmodified and in order into the response packet.
  Other Attributes can be placed before, after, or even between the
  Proxy-State attributes.
  
  2.3 Proxy
  
  The forwarding server MUST treat any Proxy-State attributes already
  in the packet as opaque data.  Its operation MUST NOT depend on the
  content of Proxy-State attributes added by previous servers.
  
  If there are any Proxy-State attributes in the request received from
  the client, the forwarding server MUST include those Proxy-State
  attributes in its reply to the client.  The forwarding server MAY
  include the Proxy-State attributes in the access-request when it
  forwards the request, or MAY omit them in the forwarded request.  If
  the forwarding server omits the Proxy-State attributes in the
  forwarded access-request, it MUST attach them to the response before
  sending it to the client.

=head2 Proxy-State, Implementation

C<-E<gt>pack()> and C<-E<gt>dump()> now work properly with multiple
atributes, in particular the Proxy-State attribute - This means that
the packet will be encoded with the multiple attributes present. This
change makes Net::Radius::PacketOrdered likely redundant.

C<-E<gt>attr()> method always return the last attribute inserted.

C<-E<gt>set_attr()> and C<-E<gt>set_vsattr()> methods push either the
attribute or the vendor-specific attribute, onto the Attributes stack,
or overwrites it in specific circumnstances, as described in method
documentation. The C<-E<gt>unset_attr()> and C<-E<gt>unset_vsattr()>
perform the opposite function.

=head2 OBJECT METHODS

There are actually two families of object methods. The ones described
below deal with standard RADIUS attributes. An additional set of methods
handle the Vendor-Specific attributes as defined in the RADIUS protocol.
Those methods behave in much the same way as the ones below with the
exception that the prefix B<vs> must be applied before the B<attr> in most
of the names. The vendor code must also be included as the first parameter
of the call.

The B<vsattr> and B<set_vsattr> methods, used to query and set
Vendor-Specific attributes return an array reference with the values
of each instance of the particular attribute in the packet. This
difference is required to support multiple VSAs with different
parameters in the same packet.

=over 4

=item B<-E<gt>set_dict($dictionary)>

Net::Radius::Packet needs access to a Net::Radius::Dictionary object to do
packing and unpacking.  set_dict must be called with an appropriate
dictionary reference (see L<Net::Radius::Dictionary>) before you can
use ->B<pack> or ->B<unpack>.

=item B<-E<gt>unpack($data)>

Given a raw RADIUS packet $data, unpacks its contents so that they
can be retrieved with the other methods (B<code>, B<attr>, etc.).

=item B<-E<gt>pack>

Returns a raw RADIUS packet suitable for sending to a RADIUS client
or server.

=item B<-E<gt>code>

Returns the Code field as a string.  As of this writing, the following
codes are defined:

    Access-Request
    Access-Accept
    Access-Reject
    Accounting-Request
    Accounting-Response
    Accounting-Status
    Interim-Accounting
    Password-Request
    Password-Ack
    Password-Reject
    Accounting-Message
    Access-Challenge
    Status-Server
    Status-Client
    Resource-Free-Request
    Resource-Free-Response
    Resource-Query-Request
    Resource-Query-Response
    Alternate-Resource-Reclaim-Request
    NAS-Reboot-Request
    NAS-Reboot-Response
    Next-Passcode
    New-Pin
    Terminate-Session
    Password-Expired
    Event-Request
    Event-Response
    Disconnect-Request
    Disconnect-ACK
    Disconnect-NAK
    CoA-Request
    CoA-ACK
    CoA-NAK
    IP-Address-Allocate
    IP-Address-Release

=item B<-E<gt>set_code($code)>

Sets the Code field to the string supplied.

=item B<-E<gt>identifier()>

Returns the one-byte Identifier used to match requests with responses,
as a character value.

=item B<-E<gt>set_identifier($id)>

Sets the Identifier byte to the character supplied.

=item B<-E<gt>authenticator()>

Returns the 16-byte Authenticator field as a character string.

=item B<-E<gt>set_authenticator($authenticator)>

Sets the Authenticator field to the character string supplied.

=item B<-E<gt>attr($name)>

Retrieves the value of the named Attribute.  Attributes will
be converted automatically based on their dictionary type:

        STRING     Returned as a string.
        INTEGER    Returned as a Perl integer.
        IPADDR     Returned as a string (a.b.c.d)
        TIME       Returned as an integer

The following types are simply mapped to other types until correct
encoding is implemented:

=over

=item B<ipv6addr>

Treated as a string

=item B<date>

Treated as a string

=item B<ifid>

Treated as a string

=back

When multiple attributes are inserted in the packet, the last one is
returned.

=item B<-E<gt>set_attr($name, $val, $rewrite_flag)>

Sets the named Attributes to the given value. Values should be
supplied as they would be returned from the B<attr> method. If
rewrite_flag is set, and a single attribute with such name already
exists on the Attributes stack, its value will be overwriten with the
supplied one. In all other cases (if there are more than one
attributes with such name already on the stack, there are no
attributes with such name, rewrite_flag is omitted) name/pair array
will be pushed onto the stack.

=item B<-E<gt>set_vsattr($vendor, $name, $val, $rewrite_flag)>

Analogous to C<-E<gt>set_attr()>, but operates on vendor-specific
attributes for vendor C<$vendor>.

=item B<-E<gt>unset_attr($name)>

Sets the named Attribute to the given value.  Values should be supplied
as they would be returned from the B<attr> method.

=item B<-E<gt>unset_vsattr($vendor, $name)>

Analogous to C<-E<gt>unset_attr()>, but operates on vendor-specific
attributes for vendor C<$vendor>.

=item B<-E<gt>attr_slot($integer)>

Deprecated synonym for C<-E<gt>attr_slot_val()>.

=item B<-E<gt>attr_slots()>

Return the number of attribute slots in the packet.

=item B<-E<gt>attr_slot_name($integer)>

Retrieves the attribute name of the given slot number from the
Attributes stack. Returns undef when the slot is vacant.

=item B<-E<gt>attr_slot_val($integer)>

Retrieves the attribute value of the given slot number from the
Attributes stack. Returns undef when the slot is vacant.

=item B<-E<gt>I<unset_attr_slot>($integer)>

Removes given stack position from the Attributes stack.

=item B<-E<gt>password($secret, [$attr])>

The RADIUS User-Password attribute is encoded with a shared secret.
Use this method to return the decoded version. By default, the
password will be looked for in the User-Password attribute. You can
specify an alternate RADIUS attribute, by using the second argument.

=item B<-E<gt>set_password($passwd, $secret, [$attribute])>

The RADIUS User-Password attribute is encoded with a shared secret.
Use this method to prepare the encoded version. The encoded password
will be stored in the attribute C<$attribute>, which defaults to
'User-Password'.

Some servers have been reported on insisting on this attribute to be
'Password' instead. You may have to tweak this call or the dictionary
accordingly.

=item B<-E<gt>dump()>

Prints the content of the packet to STDOUT.

=item B<-E<gt>show_unknown_entries($bool)>

Controls the generation of a C<warn()> whenever an unknown tuple is seen.

=back

=head2 EXPORTED SUBROUTINES

=over 4

=item B<auth_resp($packed_packet, $secret [, accounting])>

Given a (packed) RADIUS packet and a shared secret, returns a new
packet with the Authenticator field changed in accordace with RADIUS
protocol requirements.

If the third optional parameter is true, the Authenticator is encoded
for an accounting packet, using 16 0x0 octets as the placeholder for
the authenticator.

=item B<auth_acct_verify($packet, $secret)>

Verifies the authenticator in an B<Accounting-Request> packet as
explained in RFC-2866. Returns 1 if the authenticator matches the
packet and the secret, undef otherwise.

C<$packet> is the packet data, as received. C<$secret> is the
corresponding shared secret.

=item B<auth_req_verify($packet, $secret, $prev_auth)>

Verifies the authenticator in B<Access-Accept>, B<Access-Reject>, and
B<Access-Challenge> packets as explained in RFC-2865. Returns 1 if the
authenticator matches the packet and the secret, undef otherwise.

C<$packet> is the packet data, as received. C<$secret> is the
corresponding shared secret. C<$prev_auth> is the authenticator taken
from the corresponding B<Access-Accept> packet.

It's the application's job to keep track of the authenticators in each
request.

=back

=head1 EXAMPLE

See the examples included in the B<examples/> directory of the
distribution. Also see Net::Radius::Server(3) for a more complete
implementation of a RADIUS server.

=head1 AUTHOR

Christopher Masto, <chris@netmonger.net>. VSA support by Luis
E. Muñoz, <luismunoz@cpan.org>. Fix for unpacking 3COM VSAs
contributed by Ian Smith <iansmith@ncinter.net>. Information for
packing of 3Com VSAs provided by Quan Choi <Quan_Choi@3com.com>. Some
functions contributed by Tony Mountifield
<tony@mountifield.org>. Attribute ordering provided by Toni Prug,
<toni@irational.org>, idea by Bill Hulley.

=head1 SEE ALSO

Perl, Net::Radius::Server(3), Net::Radius::Dictionary(3), RFCs 2865,
2866, 2882 and 3575.

=cut
	Global
`s`	Focus search bar
`?`	Bring up this help dialog
	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)
	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse
	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)