use Test;
use blib;
BEGIN { plan tests => 49 };
use Config::Crontab;
ok(1);

my $ct;

my $crontabf = ".tmp_crontab.$$";
my $crontabd = <<'_CRONTAB_';
MAILTO=scott

## logs nightly
#30 4 * * * /home/scott/bin/weblog.pl -v -s daily >> ~/tmp/logs/weblog.log 2>&1

## logs weekly
#35 4 * * 1 /home/scott/bin/weblog.pl -v -s weekly >> ~/tmp/logs/weblog.log 2>&1

## run a backup
20 2 * * 5 /usr/bin/tar -zcvf .backup/`$HOME/bin/dateish`.tar.gz ~/per
40 2 * * 5 /usr/bin/scp $HOME/.backup/`$HOME/bin/dateish`.tar.gz mx:~/backup/tub

## fetch ufo
13 9 * * 1-5 env DISPLAY=tub:0 ~/bin/fetch_image

## check versions
#MAILTO=phil
#10 5 * * 1-5 $HOME/fetch_version -q

## start spamd
@reboot /usr/local/bin/spamd -c -d -p 1783
_CRONTAB_

my $crontabd2 = <<'_CRONTAB_';
MAILTO=scott

## fetch ufo
13 9 * * 1-5 env DISPLAY=tub:0 ~/bin/fetch_image

## logs nightly
#30 4 * * * /home/scott/bin/weblog.pl -v -s daily >> ~/tmp/logs/weblog.log 2>&1

## run a backup
20 2 * * 5 /usr/bin/tar -zcvf .backup/`$HOME/bin/dateish`.tar.gz ~/per
40 2 * * 5 /usr/bin/scp $HOME/.backup/`$HOME/bin/dateish`.tar.gz mx:~/backup/tub

## logs weekly
#35 4 * * 1 /home/scott/bin/weblog.pl -v -s weekly >> ~/tmp/logs/weblog.log 2>&1

## start spamd
@reboot /usr/local/bin/spamd -c -d -p 1783

## check versions
#MAILTO=phil
#10 5 * * 1-5 $HOME/fetch_version -q
_CRONTAB_

my $crontabd3 = <<'_CRONTAB_';
MAILTO=scott

## fetch ufo
13 9 * * 1-5 env DISPLAY=tub:0 ~/bin/fetch_image

## logs nightly
#30 4 * * * /home/scott/bin/weblog.pl -v -s daily >> ~/tmp/logs/weblog.log 2>&1

## logs weekly
#35 4 * * 1 /home/scott/bin/weblog.pl -v -s weekly >> ~/tmp/logs/weblog.log 2>&1

## start spamd
@reboot /usr/local/bin/spamd -c -d -p 1783

## check versions
#MAILTO=phil
#10 5 * * 1-5 $HOME/fetch_version -q

## run a backup
20 2 * * 5 /usr/bin/tar -zcvf .backup/`$HOME/bin/dateish`.tar.gz ~/per
40 2 * * 5 /usr/bin/scp $HOME/.backup/`$HOME/bin/dateish`.tar.gz mx:~/backup/tub
_CRONTAB_

## write a crontab file
open FILE, ">$crontabf"
  or die "Couldn't open $crontabf: $!\n";
print FILE $crontabd;
close FILE;

## read our crontab
ok( $ct = new Config::Crontab( -file => $crontabf ) );
ok( $ct->read );
ok( $ct->dump, $crontabd );

## rearrange the furniture
ok( $ct->up($ct->block($ct->select( data_re => 'start spamd' ))) );
ok( $ct->down($ct->block($ct->select( data_re => 'logs weekly' ))) );
ok( $ct->first($ct->block($ct->select( data_re => 'fetch ufo' ))) );
ok( $ct->down($ct->block($ct->select( data_re => 'fetch ufo' ))) );
ok( $ct->dump, $crontabd2 );
ok( $ct->write );
undef $ct;

## read our file again
$ct = new Config::Crontab;
$ct->file($crontabf);
$ct->read;
ok( $ct->dump, $crontabd2 );

## more furniture adjustments
ok( $ct->last($ct->block($ct->select( data_re => 'run a backup' ))) );
ok( $ct->dump, $crontabd3 );

## write to a different file
ok( $ct->file(".foo_" . $crontabf) );
ok( $ct->write );
undef $ct;

## test a pipe with 'new'
$ct = new Config::Crontab( -file => "cat $crontabf|" );
$ct->read;
ok( $ct->dump, $crontabd2 );
undef $ct;

## test a pipe with 'new'
$ct = new Config::Crontab( -file => "perl -ne 'print' $crontabf|" );
$ct->read;
ok( $ct->dump, $crontabd2 );
undef $ct;

## test a pipe with 'file'
$ct = new Config::Crontab;
$ct->file("perl -ne 'print' $crontabf|");
$ct->read;
ok( $ct->dump, $crontabd2 );
undef $ct;

## test a pipe with 'file'
$ct = new Config::Crontab;
$ct->read( -file => "perl -ne 'print' $crontabf|" );
ok( $ct->dump, $crontabd2 );
undef $ct;

## 
ok( $ct = new Config::Crontab( -file => ".foo_" . $crontabf ) );
ok( $ct->read );
ok( $ct->dump, $crontabd3 );

## make sure nothing bad happened to this file
ok( $ct->file($crontabf) );
ok( $ct->read );
ok( $ct->dump, $crontabd2 );

## make all the comments last
ok( $ct = new Config::Crontab( -file => $crontabf ) );
ok( $ct->read );
for my $block ( $ct->blocks ) {
    $block->last($block->select( type => 'comment' ));
}
undef $ct;

## do mode tests

## line tests turned out to be "shoot the arrow, whatever it hits, call the target"
ok( $ct = new Config::Crontab( -file => $crontabf,
			       -mode => 'line' ) );
ok( $ct->mode, 'line' );
ok( $ct->read );
ok( $ct->blocks, $ct->select );

my $crontabd4 = $crontabd2; $crontabd4 =~ s/(\S)\n(\S)/$1\n\n$2/sg;
ok( $ct->dump, $crontabd4 );
undef $ct;

## file tests
ok( $ct = new Config::Crontab( -file => $crontabf,
			       -mode => 'file' ) );
ok( $ct->mode, 'file' );
ok( $ct->read );
ok( $ct->dump, $crontabd2 );
undef $ct;

## do squeeze tests
my $crontabd5 = <<_CRONTAB_;
## comment 1
5 8 * * * /bin/command1


## for best results
## squeeze from end of tube
5 10 * * * /bin/command2









## comment 3
MAILTO=joe
0 0 * * Fri /bin/backup


_CRONTAB_

open FILE, ">$crontabf"
  or die "Could not open $crontabf: $!\n";
print FILE $crontabd5;
close FILE;

## squeeze: FIXME: squeeze(0) doesn't work properly
ok( $ct = new Config::Crontab( -file    => $crontabf,
			       -squeeze => 0 ) );
ok( $ct->squeeze(1) );  ## squeeze
ok( $ct->read );
ok( $ct->dump, <<_CRONTAB_ );
## comment 1
5 8 * * * /bin/command1

## for best results
## squeeze from end of tube
5 10 * * * /bin/command2

## comment 3
MAILTO=joe
0 0 * * Fri /bin/backup
_CRONTAB_
undef $ct;


## test reading/writing from a nonexistent file: strict should take effect here
ok( $ct = new Config::Crontab( -file => ".tmp_foo.$$" ) );
ok( $block = new Config::Crontab::Block );
ok( $block->last( new Config::Crontab::Event( -data => '5 10 15 20 Mon /bin/monday' ) ) );
ok( $ct->last($block) );
ok( $ct->write );
undef $ct;

ok( $ct = new Config::Crontab( -file => ".tmp_foo.$$" ) );
ok( $ct->dump, <<_DUMP_ );
5 10 15 20 Mon /bin/monday
_DUMP_
undef $ct;
unlink ".tmp_foo.$$";

eval { $ct = new Config::Crontab( -file => ".tmp_foo.$$", -strict => 1 ) };
ok( $@ );

undef $ct;
eval { $ct = new Config::Crontab( -file => ".tmp_foo.$$", -strict => 0 ) };
ok( !$@ );

## we don't test non-squeeze mode because it doesn't really work

END {
    unlink $crontabf;
    unlink ".foo_$crontabf";
    unlink ".tmp_foo.$$";
}

## this is a test for trying to write bogus data into the crontab
#perl -Mblib -MConfig::Crontab -e '$c=new Config::Crontab; $c->read; $c->last(new Config::Crontab::Block(-data => "## testing\n5 * * * Buz /bin/date")); $c->write or die "Bad write: $@\n"'